Tips for Working with Laminate
Measure along the tops of the base cabinets to determine the size of the countertop. If the wall corners are not square, use a framing square to establish a reference line (R) near the middle of the base cabinets, perpendicular to the front of the cabinets. Take four measurements (A, B, C, D) from the reference line to the cabinet ends. Allow for overhangs by adding 1" to the length for each exposed end and 1" to the width (E).
Lay out cutting lines on the particleboard so you can rip-cut the substrate and buildup strips to size using a framing square to establish a reference line. Cut the core to size using a circular saw with a clamped straightedge as a guide. Cut 4" strips of particleboard for the backsplash and for joint support where sections of countertop core are butted together. Cut 3" strips for the edge buildups.
No comments:
Post a Comment