Dry-fit tiles on the countertop to find the layout that works best. Once the layout is established, make marks along the vertical and horizontal rows. Draw reference lines through the marks and use a framing square to make sure the lines are perpendicular.
Variation: Small Floor Tiles & Bullnose Edging
Lay out tiles and spacers in a dry run. Adjust the starting lines, if necessary. If using battens, lay the field tile flush with the battens, then apply the edge tile. Otherwise, install the edging first. If the countertop has an inside corner, start there by installing a ready-made inside corner or by cutting a 45° miter in the edge tile to make your own inside corner.
Place the first row of field tile against the edge tile, separating the tile with spacers. Lay out the remaining rows of tile. Adjust the starting lines if necessary to create a layout using the smallest number of cut tiles.
No comments:
Post a Comment