OPTION: Use a jigsaw fitted with a downstroke blade to cut post-form. If you are unable to locate a downstroke blade, you can try applying tape over the cutting lines, but you are still likely to get tear-out from a normal upstroke jigsaw blade.
Use a framing square to mark a cutting line on the bottom surface of the countertop. Cut off the countertop with a jigsaw using a clamped straightedge as a guide.
Attach the battens from the endcap kit to the edge of the countertop using carpenter’s glue and small brads. Sand out any unevenness with a belt sander.
No comments:
Post a Comment