Remove the temporary ledger. Check the cabinet run for plumb, and adjust if necessary by placing wood shims behind the cabinet, near the stud locations. Tighten the wall screws completely. Cut off the shims with a utility knife.
Use trim moldings to cover any gaps between the cabinets and the walls. Stain the moldings to match the cabinet finish.
Attach decorative valance above the sink. Clamp the valance to the edge of cabinet frames and drill counterbored pilot holes through the cabinet frames and into the end of the valance. Attach with sheet-metal screws.
Install the cabinet doors. If necessary, adjust the hinges so that the doors are straight and plumb.
Good job, installing cabinets at right place is very essential. This blog helpful in finding tips for installing wall cabinets.
ReplyDelete