Find high and low spots on wall surfaces using a long, straight 2 × 4. Sand down any high spots.
Fill in low spots in the wall by applying wallboard compound with a taping knife. Let the compound dry, and
then sand it lightly.
Locate and mark wall studs using an electronic stud finder. Cabinets normally will be hung by driving screws into the studs through the back of the cabinets.
Find the highest point along the floor that will be covered by base cabinets. Place a level on a long, straight 2 × 4, and move the board across the floor to determine if the floor is uneven. Mark the wall at the high point.
No comments:
Post a Comment